92 Users Manual
4. To install the battery again, slide the battery into the system as below. The battery
latches move inward, and fix the battery automatically.
For X10 plus model, slide the left battery latch to the right to fix the battery.
Using the bridge battery (Only for X30 model)
Your computer has a bridge battery, which supplies power for a short time
even when there is no battery installed. Thus you can exchange a battery in
standby mode, without turning the computer completely off. When you are
exchanging the battery in standby mode, exchange in 3 minutes.
Monitoring the Battery Charge
To monitor using a shortcut key
Press <Fn>+<F2/ > keys to view the remaining battery charge. (p16)
To monitor on the battery
Remove the battery from the computer, and press the PUSH button on the battery to
view the approximate remaining battery charge (%).
To Next Page
Loading...
