94 Users Manual
Upgrading Memory
This computer has a 128 MB or 256 MB memory module. There is a socket in which
one additional memory module can be installed.
Removing the memory module
Before removing/replacing the memory module, turn the system off
completely. Do not replace the memory module when the system is in
Standby/Hibernate mode.
1. Using a screwdriver, open the memory module compartment cover on the bottom
of the computer.
2. Push the memory module tabs outward to pop the memory module upwards.
Carefully pull the module out at an angle of about 30
°.
screw
To Next Page
Loading...
