Samsung NX30 - Connecting with Other Devices; Step 1. Connecting Devices

4-28
Manual
Connecting with Other Devices
This section describes the common steps when using Bluetooth. Read this section first
before reading any other instructions.
A Bluetooth connection consists of a client requesting a connection, and a server
approving the connection. When you establish a Bluetooth connection, you need to
enter a PIN (Personal Identification Number) code in both the client and the server,
and the server has to approve the transmission for actual data transmission.
■
Step 1. Connecting
1. The client attempts to connect to the server. This happens when you are trying
to transfer a file to the server, or to connect to the network via the server.
2. When a notification window appears in the Bluetooth icon on the taskbar of
the server that requests a password, click the notification window.
3. Enter the desired password in the Bluetooth PIN Code field of the [Bluetooth
PIN Code Request] window, and click OK.
4. The same window appears on the client, enter the same password as on the
server, and click OK.
Now a connection between the client and the server has been established.