5-7
Chapter 5. System Management
Upgrading Memory
This computer has a 128 MB or 256 MB memory module. There is a
socket in which one additional memory module can be installed.
1. Using a screwdriver, open the memory-module compartment cover on the bottom
of the system.
2. Push the memory module tabs outward to pop the memory module outward.
Pull the module out at an angle of about 30°.
Screws
Before replacing the memory module, turn the system off completely. Do not
replace the memory module when the system is in Rest Mode.
N
N
o
o
t
t
e
e
To Next Page
Loading...
