142
Camera settings menu > Setting
* Default
Item Description
Date & Time
Set date, time, date format, time zone and whether to
imprint the date on photos. (Time Zone, Date/Time Set,
Date Type, Time Type, Imprint)
•
The date appears on the lower right side of the photo.
•
When you print a photo, some printers may not print
the date appropriately.
Video Out
Set the video signal output appropriate for your country
when connecting the camera to an external video device
such as a monitor or HDTV.
• NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc.
• PAL (Supports only PAL B, D, G, H, or I): Australia, Austria,
Belgium, China, Denmark, Finland, France, Germany,
England, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway, etc.
Anynet+
(HDMI-CEC)
When you connect the camera to an HDTV that supports
Anynet+ (HDMI-CEC), you can control the play function of
the camera with the TV remote control.
• O: You cannot control the play function of camera with
the TV remote control.
• On*: You can control the play function of camera with the
TV remote control.
* Default
Item Description
Auto Power
O
Set power shut o time. The camera shuts o if you do not
use it for the time you set. (O, 1 min*, 3 min, 5 min,
10 min, 30 min)
•
The camera retains the power-o time setting even if
you replace the battery.
•
Auto Power O may not work if the camera is
connected to a computer or a TV or playing a slide
show or a movie.
Help Guide
Display
• Mode Help Guide: Set to display help text about the
selected mode when changing shooting modes.
(O, On*)
• Function Help Guide: Set to display help text about
menus and functions. (O, On*)
Press [n] to hide the help text.
Language
Set a language the camera shows on the display.
To Next Page
Loading...
