My Camera > Accessories
50
Connecting the external ash
1
Mount the ash by sliding it into the hot-shoe.
2
Lock the ash into place by turning the hot-shoe fastening dial
clockwise.
3
Lift up the ash for use.
•
You can capture a photo with a ash that is not fully charged, but it is
recommended to use a fully charged ash.
•
The available options may dier depending on the shooting mode.
•
There is an interval between two bursts of the ash. Do not move until the
ash res a second time.
•
SEF8A may not be compatible with other NX series cameras.
•
For more details about optional ashes, refer to the user manual for the ash.
Use only Samsung-approved ashes. Using incompatible ashes may damage
your camera.
To Next Page
Loading...
