My Camera > Shooting modes
59
Using the Bulb function
Use the Bulb function to shoot night scenes or the night sky. During the
interval between the rst [Shutter] press and the second [Shutter] press,
the shutter is left open so you can create moving light eects.
To use a bulb,
In Shooting mode, press [I] to select the shutter speed
ĺ
Completely rotate the navigation button counter-clockwise
to set the shutter speed to Bulb
ĺ
Press [Shutter] to start
shooting
ĺ
Press [Shutter] again to stop shooting.
•
If you set a high ISO value or open the shutter for a long time, image noise
may increase.
•
Drive options and ash options cannot be used with the Bulb function.
•
The Bulb function is available only in Manual mode.
•
Use a tripod to prevent your camera from shaking.
•
The longer you open the shutter, the longer it takes to save a photo. Do not
turn the camera o while the camera saves a photo.
•
If you use this function for a long time, use a fully charged battery.
To Next Page
Loading...
