87
Shooting Functions > Drive (shooting method)
Depth Bracketing
When you press [Shutter], the camera captures 3 consecutive photos,
each with a dierent depth of eld by adjusting the aperture value. Use
a tripod to prevent blurry photos as the camera captures three photos
continuously. You can adjust the settings in Bracket Settings menu.
•
To set the bracketing details, press [m]
ĺ
d
ĺ
Bracket Settings
ĺ
an
option.
•
This feature is available only in Program or Aperture Priority mode.
•
If the aperture value is set to its maximum or minimum, two photos will be
captured with the maximum or minimum aperture value.
To Next Page
Loading...
