Samsung OfficeServ 500 - Non Display Keysets; When Using a Single Line Telephone

WHEN USING A DISPLAY KEYSET WITH
MULTIPLE RING PLAN KEYS
ACTION DISPLAY
1. Press the RING PLAN (RP) key desired. Enter Passcode
2. Enter passcode
3. If you pressed DAY (RP1) KEY RP service
operation
4. If you pressed NIGHT (RP2) KEY RP service
operation
5. If you pressed WKEND (RP3) KEY RP service
operation
WHEN USING A SINGLE LINE TELEPHONE
To set night service from a business or administrator single line set:
• Dial RING PLAN (RP) feature access code
• Dial passcode.
• Dial 1 for DAY OPERATION
Dial 2 for NIGHT OPERATION
Dial 3 for WEEKEND OPERATION
• Receive confirmation tone.
• Hang up.
*Passcode and feature access codes are provided by your service company.
24
NON DISPLAY KEYSETS
Non-display keysets can also manually change night service.
With a single RING PLAN (RP) key:
• Press the RING PLAN (RP) key and dial the passcode.
• Dial “1” for DAY mode, “2” for NIGHT mode, or “3” for WEEKEND mode. You will
receive a confirmation tone when set.
With dedicated RING PLAN (RP) keys:
• Press the RING PLAN (RP) key that corresponds with the desired mode.
• Dial the passcode and you will receive a confirmation tone when set.
25
Home Page
Table of Contents
iDHS Sys Admin