17
PROGRAM STATION GROUP NAMES
This program is used to assign a character name or identification for each station
group. You may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 602 [5
01] SGR NAME
Display shows the first group
2. Dial the group number (e.g., 505) OR [505] SGR NAME
press the UP or DOWN key to make a
selection and press the left or right
soft key to move the cursor
3. Enter the name using the method [505] SGR NAME
in P
rogr
am Station Names
SAMSUNG
4. Press the left or right soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
System_Administration_Guide.qxp 4/30/2007 12:56 PM Page 24
To Next Page
Loading...
