47
Protecting the Screen Burning (continued)
ENG
12 Press the † or … button to select Signal Pattern.
Press the
ENTER () button. Set to On by pressing the † or …
button for removing the residual image.
Press the
ENTER () button.
➢
The
Signal Pattern
and
All White
feature are
effective after working for a long time.
Changing the Sound Standard
You can select the type of special sound effect to be used when watching a
given broadcast.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the † or … button to select Sound.
Result
: The options available in the Sound group are
displayed.
3 Press the ENTER () button.
Result
: The Mode is selected.
4 Press the ENTER () button again.
5 Select the option by pressing the † or … button.
The sound effects are displayed in the following order.
Standard - Music - Movie - Speech - Custom.
6 Press the ENTER () button to confirm.
➢
You can also set these options simply by pressing the S.MODE
(: Sound Mode) button.
Pixel Shift
All White : Off
Signal Pattern : Off
Burn Protection
Move Enter Return
TV
Off
On
Mode : Standard
√√
Equalizer
√√
Auto Volume : Off
√√
SRS TSXT : Off
√√
Internal Mute : Off
√√
Sound
Move Enter Return
TV
Mode : Standard
Equalizer
Auto Volume : Off
SRS TSXT : Off
Internal Mute : Off
Sound
Move Enter Return
TV
Standard
Music
Movie
Speech
Custom
BN68-00742A-00Eng_0621 2004.6.21 3:52 PM Page 47
To Next Page
Loading...
