55
ENG
Switching the Television On and Off Automatically
Time
√√
Language : English
√√
Digital NR : On
√√
Miscellaneous
√√
PC Setup
√√
Colour Weakness
: Off
√√
Burn Protection
√√
Setup
Move Enter Return
TV
Clock 07 : 05 am
√√
Sleep Timer Off
√√
On Timer Off
√√
Off Timer Off
√√
Time
Move Enter Return
TV
On Timer
Adjust
√√
Move Return
TV
Off Timer
Adjust
√√
Move Return
TV
You can set the television’s clock and set the On or Off timers so that the
television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➢
The first step is to set the television’s clock (refer to “Setting
and Displaying the Current Time” on the previous page).
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER () button.
4 Press the † or … button to select Time.
Press the
ENTER () button.
Result
: The options available in the Time group are displayed.
5 Press the ▼ or ▲ button to select On Timer.
Press the
ENTER () button.
Result
: The options available in the On Timer group are
displayed.
6 Select the Hour, Min, am/pm, Prog., Volume by pressing
the
œ or √ button. Set these by pressing the † or … button.
7 Press the œ or √ button to move to the Activation.
8 When you are satisfied with the settings, select Activation to
Yes or No by pressing the † or … button.
9 Press the MENU button.
Result
: The options available in the Time group are displayed
again.
10 Press the † or … button to select Off Timer.
Press the
ENTER () button.
Result
: The Off Timer menu is displayed.
11 Select the Hour, Min, am/pm or Activation by pressing
the
œ or √ button. Set these by pressing the † or … button.
12 Press the ENTER () button to confirm.
➢
Absent Power Off
When you set the timer “On”, your television will eventually be
turned off, if you do not operate any controls during the 3 hours
after the TV is turned on by timer. This function is available in
only the timer “On” mode and will prevent a leakage accident
or overheating, caused by your TV left on for a long time due to
the timer “On” (when you are away on holiday, for example).
➢
If no signal is received for 15 minutes, the TV will be
automatically turned off.
Hour Min am/pm
12 01 am
Prog. Volume Activation
110No
Hour Min am/pm Activation
12 00 am No
BN68-00742A-00Eng_0621 2004.6.21 3:52 PM Page 55
To Next Page
Loading...
