52
ENG
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the
Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the
Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM DUAL-I/II
Regular broadcast
(Standard audio)
Bilingual or DUAL-I/II
Stereo
On-screen indication
Mono
(Normal use)
NICAM Mono
↔
Mono
NICAM Stereo
↔
Mono
(Forced mono)
Mono
DUAL-
I
↔
DUAL-II
Stereo
↔
Mono
(Forced mono)
NICAM DUAL-I
→
NICAM DUAL-II
→
Mono
NICAM
Stereo
A2
Stereo
Selecting the Sound Mode (depending on the model)
BN68-00742A-00Eng_0621 2004.6.21 3:52 PM Page 52
To Next Page
Loading...
