68
2nd 3rd Description
Advanced Settings Colour Space Settings Configure colour space settings to refine the spectrum of colours on your screen.
Colour Space
Choose a colour space.
"
To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
Colour Gamut
Choose a colour gamut.
Input Signal Plus Expands the input signal range for HDMI connections.
"
When Input Signal Plus is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported.
When Input Signal Plus is set to Off, up to the 3840 x 2160 @ 30 Hz resolution is supported.
"
Connecting parts may differ depending on the model.
Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
Picture Options Colour Tone Select the colour tone that best suits your viewing preferences.
"
Settings can be adjusted and stored for each external device connected to an input on the product.
"
Available options may vary depending on the product.
Digital Clean View Reduce picture noise to avoid distractions such as flickering.
HDMI Black Level Adjust the black level to optimise the HDMI picture brightness and contrast.
"
Only available if the input signal from the external device connected to the HDMI port is RGB444.
Film Mode Make frame transitions from older video sources smoother. This function is only available when the input signal is TV, AV,
Component (480i, 1080i), or HDMI (1080i).
Dynamic Backlight Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
Apply Picture Settings Apply the picture settings to all external devices connected to the device or to the current source only.
To Next Page
Loading...
Need help?
General
