102
2nd 3rd Description
Power and Energy Saving Energy Saving Solution Reduce power consumption by adjusting brightness settings.
Backlight Optimization Automatically adjust the screen brightness based on the ambient light level.
Min. Brightness: Set the minimum brightness for the signage screen. This function only works if its value is lower than the
value set in the Picture menu's Backlight setting.
"
This function may not be supported depending on the model.
Backlight Schedule Adjust panel brightness by schedule. The closer to 100, the brighter the panel.
No Signal Power Off Save power by turning the product off when no signal is received from any source.
"
This function does not operate if the display is in the standby mode.
"
The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off Choose how long the display will wait before turning off after no user interaction is detected.
To Next Page
Loading...
Need help?
General
