- 33/47 -
Step 1
① Check frost attachment with ICE ROUTE on F-
DOOR OPEN condition.
- If the frost appears on ICE ROUTE only, it
appears because of ICE dispensing so that
is normal.
Step 2 ( When freezing appears until ICE
BUCKET bottom)
① Inspect water leakage with flashing on F-
DOOR OPEN ICE ROUTE top or pouring
water
② Failure when water or light leak
③ Assemble to check the COVER ICE ROUTE
assembly condition and should be no
swerving.
Step 3
① Replace ASSY CASE-LEVER DISP if it is not
assembly problem.
Tip 6-1. Inspect ICE ROUTE DEFROST BUILD
When the
light leaking
조립불량
To Next Page
Loading...
