- 48/47 -
Step 1
① Disassemble the R ASSY COVER DAMPER.
Step 2
① Inspect the location fixing condition of R-
SENSOR
- TOO COLD occurs when separate or cover
the front with protection vinyl.
② Inspect DAMPER
- Inspect Damper Closing condition when
disassemble
※ Close condition when open R door after
power restarting on CONNECTOR condition.
- Failure when it is opened
Replace INS-DAMPER.
Check Point
Inspect COVER DAMPER
Tip 10-1. Inspect R TOO COLD
R-Sensor
Damper
Damper
To Previous Page
Loading...
