LG_MULTI_F_3828A20097W_1[1]
DISASSEMBLY & REASSEMBLYDISASSEMBLY & REASSEMBLY
1. Pick Assy 1. Pick Assy
enser like the enser like the
pull them upward.pull them upward.
Be careful not to scratch.Be careful not to scratch.
Control PanelControl Panel
1. Remove Inlay film as shown.1. Remove Inlay film as shown.
2. Insert a flat-head screwdriver on the slot as2. Insert a flat-head screwdriver on the slot as
shown, and unlock the tabs.shown, and unlock the tabs.
3. Disconnect the wire connector.3. Disconnect the wire connector.
When disassembling, When disassembling,
make sure themake sure the
unit turned off.unit turned off.
3-3. Door Sub parts3-3. Door Sub parts