Samsung SC-D352 - USB Interface - Streaming and Storage; Using USB Streaming Function; Using Removable Disk Function

[ ENGLISH ]
USB Interface (SC-D352/D353/D354/D355 only)
Using the USB Streaming Function
+ To use USB streaming, the DV Driver, Video Codec and DirectX 9.0. programs must be installed in the PC.
+ Youcan view Camcorder video on your PC using USB streaming.
+ Youcan also store it as a moving picture in the "avi" file format, or as a still image in the "jpg" file format on a PC.
1. Setthe Mode switch to TAPE(SC-D3531D354/D355only), set the Power switch to CAMERA or PLAYER.
2. Connectone end of the USB cable to the USB jack onthe Camcorder and the other end to the USB port on your computer.
3. Setupand executeWindowsMovie Makeror the UIeadVIDEOStudioSoftwareapplicationprovidedon the OD.
- For detailed instructions for Ulead VIDEO Studio use, refer to the program's Help function.
- Windows Movie Maker is used for WINDOWS ME and XP users. (C:_rogram files\Movie maker\moviemk.exe)
Using the removable Disk Function (SC-D353/D354/D355only)
+ Youcan easily transfer data from a Memory card to a PC withoutadditional add-oncards via a USB connection.
1. Setthe Modeswitch to MEMORYCARD, set the Power switch to CAMERA or PLAYER.
2. Connectone end of the USB cable to the USB jack onthe Camcorder and the other end to the USB port on your computer.
3. To verify whether the removable disk has been properly recognized,open Windows Explorer and locate the removable disk.
Connecting to a PC
1. Connecta USB cable to the USB port on the PC.
• If a USB cable is connectedto the Camcorder's USB port, nothing is displayed on a TV.
2. Connectthe other end of the USB cable into the USB jack on the Camcorder.(USB jack)
• If a PC is connected to the Camcorder with a USB cable only, Zoom switch and
NITE PIX (SC-D352/D3541D355only) operate.
Disconnectingthe USB Cable
+ Aftercompleting the data transmission, you must disconnect the cable in the
following way:
1. Select the removable disc icon and click the right mouse button to select [Eject].
2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen
appears.
[ Notes ]
• If you disconnect the USB cable from the PC or the Camcorder while transferring, the data transmission will stop and the data may
be damaged.
,_ Ifyou connect the USB cable to a PC via a USB HUB or simultaneously connect the
USB cable along with other USB devices, the Oamcorder may not work properly.
If this occurs, remove all USB devices from the PC and reconnect the Camcorder.