30_
installing your camera
installing your camera
English English _ 31
INSTALLING YOUR CAMERA
Assemble Camera & Bracket
Cameras on the sides 'Align The Arrow' triangle corner mount bracket and the arrow
shows a match to match.
Insert the mount bracket to the matching holes in the camera, and then turn the
camera clockwise.
Secure the Camera
Match the screw holes in the camera and mount bracket, and then fasten with the
screw.
3.
-
-
4.
Screw Hole
Alingn The ArrowAlingn The ArrowAlingn The ArrowAlingn The Arrow
Mount Bracket
Connect Cables
Connect each camera cable to the proper terminals on the bottom of the camera. For
more detailed instructions, please refer to Page 13:“Camera Wiring Interface Board”.
Camera DIP Switch Setup
DIP switches for communication and ID setup are located on the bottom of the camera.
For more instructions, please refer to Page 18.
5.
6.
To Next Page
Loading...
