Samsung SCP-2120 - Page 29

56_ functional description
functional description
English English _ 57
FUNCTIONAL DESCRIPTION
Swing SEQ
Main Menu/Sequence Setting/Swing SEQ
The Swing function commands the camera to move
between 2 selected locations, monitoring the route.
Pan Swing :
Activates the Pan function for the Swing operation.
Tilt Swing :
Activates the Tilt function for the Swing operation.
P/T Swing :
Activates both the Pan and Tilt functions for the
Swing operation.
Swing Settings/Execute/Clear :
- Settings : Each of the Swing menus have sub
menus with the settings.
Select 2 preset locations by using the joystick. Speed indicates the camera’s
movement speed. DWT indicates the camera’s duration of stay at a preset location.
- Execute: Executes the Swing operation.
- Clear: Deletes data in the Swing memory.
►
•
•
•
•
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Swing SEQ
Pan Swing
Tilt Swing
P/T Swing
Pan Swing
Setting
Execute
Clear
Pan Swing Setting
[001]st[***]
SPEED=64 (1~64)
DWT =005(1~128)(s)
Group SEQ
Main Menu/Sequence Setting/Group SEQ
Selecting Group SEQ recalls a group of multiple
preset locations in a consecutive manner. A group
can contain up to 128 preset locations.
Setting :
Using the joystick, enter desired preset numbers
into the PSET section. DWT indicates the
camera’s duration of stay at a preset location.
SPD shows the camera’s movement speed by 64
different levels.
Execute :
Executes the group operation.
Clear :
Deletes the selected group.
►
•
•
•
Group SEQ 1
NO PSET DWT(s) SPD
001 *** 003 64
002 *** 003 64
003 *** 003 64
004 *** 003 64
005 *** 003 64
006 *** 003 64
007 *** 003 64
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Group SEQ
Group 1
Group 2
Group 3
Group 4
....
Group SEQ 1
Setting
Execute
Clear