Samsung SDC-313B - Connecting to Power

COLOR CCD CAMERA User’s Manual
36
COLOR CCD CAMERA User’s Manual
37
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Troubleshooting
Problem Solution
Nothingappearson
thescreen.
• Pleasecheckthepowerconnection.
• Pleasecheckthevideosignallineconnection.
• Pleasecheckandmakesurethattheautolensswitch
is set to DC (VIDEO) when using a DC (VIDEO) lens.
• PleasechecktheBrightnessofAutoIrislens.
Thevideoimageis
notclear.
• Pleasecheckifthelensisclean.
Pleasecleanthelenswithacleanclothorbrush.
• Pleaseadjustthecontrastfeatureofthemonitor.
• Pleasemakesurethatthescreenisnotexposed
directlytoabrightlight.
Pleasemovethecameraifnecessary.
• Pleasereadjustthebackfocusofthecamera.
Thescreenisdark. • Pleaseadjustthecontrastfeatureofthemonitor.
• Ifyouhaveanintermediatedevice,setthe75Ω/Hi-z
properly, and check the terminals. (refer to page 18)
• Pleasecheckifanautoirislensisbeingusedand
adjustthebrightnesslevel.
Thereisaproblemwiththe
cameraoperation.The
camerasurfaceistoohotand
blackstripesappearonthe
screen.
• Pleasecheckifanappropriatepowersourcetothe
camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.
Problem Solution
TheMOTIONDETECTION
functionisnotworking.
• Pleasecheckif'MOTIONDETECTION'mode is turned
on.
• PleasecheckiftheMDLEVEListoolow.
• PleasecheckthesettingoftheMDAREA.
Colorsarenotquiteright. •Pleasecheckthe'WHITEBAL'setting.(Pleasereferto
page25)
Thescreenisflickering. •Pleasecheck ifthecameraisfacingdirectlyinto
sunlight or fluorescent light.
• Pleasecheckifanautoirislensisbeingused.
• Pleasechecktheconnectionofthelensconnector
cable.
L/Lmodeisn'tabletobe
selected.
• HaveyouconnectedyourcameratoDCpowersource?
ConnectittoACpowersource.
COLOR(DAY&NIGHT)mode
isnotworking.
•PleasecheckiftheAGCmenuissettothe OFF
position.
SENS-UPfunctionisnot
working.
•PleasecheckiftheAGCmenuissettothe OFF
position.
• PleasecheckiftheSHUTTERmenuissettoMANUAL
mode.
• PleasecheckthelimitofSens-UPAUTOmode.