NTP
Go to "Main Menu"
;
"System"
;
"General"
;
"NTP".
•
NTP service: Enable/Disable NTP function.
•
Server Address: Select NTP server (time.windows.com, time.nist.gov, pool.
ntp.org).
•
Time Zone: Corresponding time zones for various nations or regions.
•
Update Time: Enable NTP function and save parameters and click Update
Time to calibrate the system time.
M
`
When NTP function is set to "Enable", system will calibrate the system time at every
00:07:50 and every start-up.
Users
Go to "Main Menu"
;
"System"
;
"Users" to enter into the User interface.
It supports up to seven users, including one administrator and six users. Click
[Edit] button to enter into the [User Edit] interface to input user name and
password.
User Name consists of 8 characters. Password MUST be 8~13 characters
long. When password is 8~9 characters long, it should be withat least a
combination of letters, digits and special symbols. If it is 10~13 characters
long, it should be with at least a combination of two types of characters. 4 or
more contiguous or repeated characters or key arrangement are prohibited, for
example 1111, 1234, abcd, qwerty.
Set user password. Administer is authorized to set user common user"s
authority.
•
Log Search: allow you check all the system logs.
•
Parameter: allow you set all the parameters.
•
Maintain: allow you update version, recover ex-factory value, device reboot
and shut down.
•
Disk Management: allow you manage and control the HDD and USB drive.
•
Remote Login: allow you remotely login DVR.
•
SEQ Control: allow you sequence live screens for all the channels.
•
Manual Record: allow you manually start/stop record.
•
Manual Capture: Allow you to manually take a snapshot
•
Backup: Tick-select the ENABLE "
√
" option and select channel for backup,
the user is allowed to back up the record in the selected channel.
•
Live: Tick-select the ENABLE "
√
" option and select a channel and the user
is allowed to view all the live images in the selected channel.
•
Playback: Tick-select the ENABLE "
√
" option of Playback and the common user is allowed to playback the selected record in
the channel.
•
PTZ: Tick-select the ENABLE “
√
” option and select a channel and the user is allowed to PTZ control in the selected channel.
To Next Page
Loading...
