DVR Boot up
SYSTEM INITIALIZATION
After connecting the DVR power cable to wall outlet, the DVR system initializing
screen will appear.
M
`
It may take 40 seconds to start up, and the screen may beep 5~6 times.
STARTUP WIZARD
After the DVR startup is complete, the startup wizard will display.
Wizard setting menu includes: Homepage, admin password setting, hard drive management, video recording schedule, basic
system configuration, network setup, e-mail and DDNS setting. You can click on "Don't show this window next time" if you do not
wish to have the wizard setting to appear next time.
1. Set Admin Password: Please create a user name and password for your
device. Password MUST be 8~13 characters long. When password is 8~9
characters long, it should be with at least a combination of letters, digits
and special symbols. If it is 10~13 characters long, it should be with at
least a combination of two types of characters. 4 or more contiguous or
repeated characters or key arrangement are prohibited, for example 1111,
1234, abcd, qwerty.
English _9
● DVR BOOT UP
To Next Page
Loading...
