Advanced
Click Advance to unfold its sub-options: Firmware Update, Load default, Events and Maintain.
Firmware Update
User may remotely update DVR system.
Updating procedure
Firstly, select the update file path. The file format is *.sw.
Secondly, click "Start" to start updating. The updating progress can be seen on
the screen.
Load Default
User may remotely restore default parameters of DVR, with same setting
method as that of DVR.
Events
User may configure Event Type, Buzzer, Send Email, Show Message and other
parameters. Detailed setting should be consistent with DVR local setting.
English _47
● WEB APPLICATION MANAGER
To Next Page
Loading...
