What to do if ESC key doesn't exit full screen on my Samsung DVR WebViewer?
If pressing the ESC key in full screen mode of the WebViewer doesn't switch your Samsung DVR to normal split mode, press the ALT+TAB keys to select 'ACTIVE MOVIE' and press the ESC key again.
What to do if my Samsung SHR-6080 Security Camera won't record when I press the REC button?
When the [REC] button is pressed on the front panel, but the REC indicator does not flash, nor the player start recording, first check if there is free space on the HDD for recording. Next, check if the record mode is set to ON in the record mode setting.
What to do if the 'NO HDD' icon and error message are displayed on my Samsung Security Camera?
If the 'NO HDD' icon and an error message appear on your Samsung Security Camera, first check the HDD connection. If the problem persists under normal conditions, it is recommended to contact the nearest service center to have the HDD checked by service personnel.
How to fix a Samsung Security Camera that does not turn on?
If your Samsung Security Camera system does not turn on and the indicator on the front panel remains off, check if the power supply is properly connected and ensure the system is receiving the correct input voltage from the power source. If the issue continues, consider replacing the power supply.
What to do if the alarm won't turn off on my Samsung SHR-6080 Security Camera?
If the alarm persists on your Samsung Security Camera system even after pressing the [ALARM] button, press the [MENU] button on the front panel and follow these steps: 1) To release the event monitoring mode: Monitoring Mode – set the duration of the event monitoring to Off. 2) To release the alarm sound: Event Record Mode - Alarm (Motion Detection/Video Loss) – deactivate the alarm sound. 3) To release the event: Event Record Mode - Alarm (Motion Detection/ Video Loss) – set the mode to Off.
Why does the [PTZ] button not work on the Live screen of my Samsung DVR?
If pressing the [PTZ] button on the Live screen of your Samsung DVR yields no response, go to Menu l Camera l and check if the current protocols and other settings in the PTZ device are properly configured according to the PTZ camera.
Why doesn't the Channel button work on the Live screen of my Samsung DVR?
The Channel button on your Samsung DVR does not work if the current screen is in event monitoring mode. In the event monitoring screen, press the [ALARM] button to exit the screen and select a channel.
What to do if the cursor won't move to the Start button during calendar search on my Samsung DVR?
If the cursor doesn't move to the Start button during a calendar search on your Samsung DVR, check if the channel and date you want to play are marked with the V symbol. Both channel and date should be checked before you can start playing with the Start button.
How to check if my additional HDD is compatible with my Samsung SHR-6080 DVR?
To check if the additional HDD is supported by the DVR of your Samsung Security Camera, consult the compatibility list. Contact the retailer where you purchased the DVR to obtain this list.
Why is there no response when I press the PTZ button on my Samsung Security Camera?
If you press the [PTZ] button on the Live screen and there is no response from your Samsung Security Camera, go to Menu l Camera l and check if the current protocols and other settings in the PTZ device are properly configured according to the PTZ camera.
General| Brand | Samsung |
|---|---|
| Model | SHR-6080 |
| Category | Security Camera |
| Language | English |
To Next Page
