6
· English
Part Name and Function
9
9
Voice output terminal
This is used to connect a speaker.
Voice input terminal
This is used to connect a microphone.
Camera connecting terminal
The camera is connected with the RJ-12 cable.
Wi-Fi Direct button
This connects the camera and smartphone
wirelessly using Wi-Fi.
Power / Network status LED
Network terminal
This is used to connect to a wired network.
Power terminal
This is used to connect to a power adapter.
5(6(7
5(6(7
Micro SD camera insert
Initialization button
This initializes the camera's settings. The system will
restart when the button is pressed and held for 10
seconds.
Camera lens
Illumination sensor
This detects the brightness of the area around the
camera. It may be changed to night vision mode
depending on the detection result.
Internal IR LED for nighttime identification
Angle adjusting hinge
To Next Page
Loading...
Need help?
General
