Samsung SNB-5000 - At a Glance (SNB-5000)

English _13
● OVERVIEW
M
` The Test Monitor Cable is connected to a portable displayer and used for testing the camera.
If you intend to use it for an actual monitoring camera, use the BNC cable instead.
` For improved EMC performance, it is recommended to use the insulation cap provided as an
accessory.
AT A GLANCE (SNB-5000)
Front Side
Item Description
a
Camera Holder
(Mount) Holes
Used when you mount the camera onto the bracket by fixing the camera
holder (mount) adaptor with the bracket.
b
Auto Iris Lens
(Optional)
Installed on the lens adaptor.
c
Auto Iris Lens
Connector
Used to supply power and output signal to control the iris of the lens.
M
` Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied
ethanol.