setup screen
J
`
If you set the Multicast address to 224.0.0.0~224.0.0.255, multicast may not work properly
in all environments. In that case, we recommend you change the multicast address.
What is GOV length?
GOV(Group of Video object planes) is a set of video frames for MPEG-4 and H.264
compression, indicating a collection of frames from the initial I-Frame (key frame) to the next
I-Frame. GOV consists of 2 kinds of frames: I-Frame and P-Frame.
I-Frame is the basic frame for the compression, also known as Key Frame, which contains
one complete image data. P-Frame contains only the data that has changed from the
preceding I-Frame.
You can specify a value between 1 and 150 for the MPEG-4 and H.264 CODEC.
Video setup
1. From the Setup menu, select the
<Video & Audio ( )> tab.
2. Click <Video setup>.
3. Select a <Video source> mode.
• Flip mode : Turn upside down
the image that is captured by the
camera.
• Mirror mode : Flip horizontal the
image that is captured by the
camera.
4. Set the <Video output>.
- If you select <Off>, the video signal
will not be output via the VIDEO OUT
port.
5. Select the video type.
6. Specify the privacy zone.
7. When done, click [Apply (
)].
74_ setup screen
To Next Page
Loading...
