Samsung SNB-5000 - Installation (SNV-5080)

English _29
● INSTALLATION & CONNECTION
INSTALLATION (SNV-5080)
Disassembling
To connect the alarm in/out, the dome cover and lens cover are to be separated.
1. Using the L-wrench provided, loosen 3 screws
by turning them counterclockwise and
separate the dome cover.
2. Lift up the inner cover while gently pressing
its both ends to separate it from the unit.
3.
Loosen 3 screws by turning them
counterclockwise, press both left and right
lock releases inwards (in arrow direction) to
unlock the stopper, and then separate the
camera from the case.
SNV-5080-1
SNV-5080-2
SNV-5080-3
SNV-5080-4
SNV-5080-5 SNV-5080-6 SNV-5080-7 SNV-5080-8
SNV-5080-9 SNV-5080-10 SNV-5080-11
< SNV-5080 >
Inner Cover
SNV-5080-1
SNV-5080-2
SNV-5080-3
SNV-5080-4
SNV-5080-5 SNV-5080-6 SNV-5080-7 SNV-5080-8
SNV-5080-9 SNV-5080-10 SNV-5080-11
< SNV-5080 >
Case
Camera Body
SNV-5080-1
SNV-5080-2
SNV-5080-3
SNV-5080-4
SNV-5080-5 SNV-5080-6 SNV-5080-7 SNV-5080-8
SNV-5080-9 SNV-5080-10 SNV-5080-11
< SNV-5080 >
Dome Cover