setup screen
To Use Crop Encoding
1. Select <Use>.
2. Click <Set area>.
The Crop Encoding Area Setup window
will pop up.
3. Select <Ratio>.
• Ratio: It sets up the aspect ratio of
the user specified area.
- 4:3 : The aspect ratio shall be set to
4:3 as close as to the user specified
area. The supporting size ranges
from 320X240 to 1024X768 and
supporting output resolutions are
320X240, 640X480, 800X600,
1024X768.
- Manual : It sets up the aspect ratio
of the user specified area.
The supporting size ranges from
320X240 to 1024X768 and supporting output resolutions are 320X240, 640X480,
800X600, 1024X768.
4. Drag the mouse on the screen to specify the Crop Encoding area at your discretion.
J
`
If set to <Manual>, the output image may be different from the actual one because of the aspect
ratio inconsistency between the Crop Encoding area and the output resolution.
`
The Crop Encoding area setup can change depending on the DIS setup. Reset the Crop Encoding
area when the DIS setup is changed.
74_ setup screen
To Next Page
Loading...
