User
1. From the Setup menu, select the
<System ( )> tab.
2. Click <User>.
3. Provide the necessary user information.
• Administrator password change :
Change the password for the
administrator.
J
`
For the security purposes, you are
recommended to use a combination
of numbers, alphabets uppercase and
lowercase and special characters for
your password.
`
It is recommended to change your
password once every three months.
`
The password length and limits are shown as follows.
-
A combination of at least two types of upper case, lower case, numeric, and special
characters: 8 to 15 characters.
-
Should be different from the ID.
-
Cannot repeat the same letter, number of special characters more than three times.
-
Cannot use three consecutive letters (e.g. abc, 123, 321, or ascii code values in the
sequential increasing or decreasing order)
-
Special characters that are allowed. : ~`!@#$%^*()_-+=|{}[].?/
-
After the factory setting, the admin and user passwords are initialized. You need to reset
the password.
-
When you access the camera web page for the first time or access it after the initialization,
you will be moved to the admin password setting menu.
-
In this menu, you need to login again with the new password before using the camera web
page menus.
English _143
● SETUP SCREEN
To Next Page
Loading...
