Samsung SNB-7004 - SNV-7084 Installation Steps

English _29
● INSTALLATION & CONNECTION
Installation
1. Using the template provided as an
accessory, drill the screw installation
hole(diameter of 6mm, minimal depth of
55mm) and firmly insert the plastic anchor
provided as an accessory to the end.
2. Fit the bottom hole to the anchor hole and
insert and fix the taping screw (M4.5xL50).
3. Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
4. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring
direction for the camera" section. (page 35)
5. Close the dome cover.
`
To ensure waterproofing, tight up the fixing bolts using the L-wrench and drill bit.
AC 24V / DC 12V
RESET
VIDE O
F
W
AF
T
N
+ -
AC 24V / DC 12V
RESET
VIDE O
F
W
AF
T
N
+ -
AC 24V / DC 12V
RESET
VIDE O
F
W
AF
T
N
+ -
AC 24V / DC 12V
RESET
VIDE O
F
W
AF
T
N
+ -