Camera setup
You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<Video & Audio (
)> tab.
2. Click <Camera setup>.
3.
Configure the settings as necessary of :
Image preset,
Sensor, SSDR, White
balance, Back light, Exposure, Day/
Night, Special, OSD
4. When done, click [Apply ( )].
`
If a certain time (timeout: 240s) is elapsed
with
your not pressing the [Apply (
)]
button after changing the settings, your
changes will not be applied.
If you want to set an image preset
Users can set presets easily.
The selected image preset mode will operate for the active period set by you, and the value
assigned to the mode will be used for the non-active period.
1. Select <Image preset>.
2. Set the <Schedule>.
• Off : Your camera will execute a
specific image preset operation at all
times.
• On : Your camera will execute a
specific image preset operation for the time period set by you on each date.
3. Click the [Add (
)] button.
English _91
● SETUP SCREEN
To Next Page
Loading...
