setup screen
SETUP
You can configure the video & audio, network, event and system settings of the camera in the
network.
1. In the Live screen, click
[
Setup
(
)
]
.
2. The Setup screen appears.
J
`
Microsoft Silverlight 5.0 or higher is required to be installed on the PC for setup pages that provide
preview video.
If not installed already, automatically moves to the Silverlight setup.
VIDEO & AUDIO SETUP
Video profile
1. From the Setup menu, select the
<Video & Audio ( )> tab.
2. Click <Video profile>.
3. Set the <Megapixel Mode>.
Changing the mode selection displays
a confirmation message regarding the
resetting the video configurations.
Click [OK] to confirm the changing
video settings.
The below configuration items for
two/three mega modes are saved
independently.
(Video & Audio : video profile/camera
setting/privacy/smart codec, Event :
tampering detection/motion detection/
video analysis/face detection. (But the
motion or the motion time setting are
not changed.))
English _83
● SETUP SCREEN
To Next Page
Loading...
