7. Specify an operation that will perform if an alarm occurs.
• FTP : Specify the use of FTP transfer in the alarm input setup.
`
Refer to “FTP / E-mail” for more details. (page 112)
• E-mail : Specify the use of email transfer in the alarm input setup.
`
Refer to “FTP / E-mail” for more details. (page 112)
• Record : Specify the use of recording in the alarm input setup.
`
Set <Device> to <On> in <Storage>. (page 114)
• Alarm output1/Alarm output2 : Select whether to set the alarm output if an alarm
is incoming, and specify the alarm output time.
• Goto preset : Moves to the specified preset location when setting the alarm input.
8. When done, click [Apply (
)].
English _123
● SETUP SCREEN
To Next Page
Loading...
