setup screen
98_ setup screen
Special Setup
1. Select <Special>.
2. Select each item and set it properly.
• DIS : Compensates the image
automatically when it is seen to
shake for stable image output.
`
Mitigates image blurring that occurs when
there is vibration of the camera due to
external factors like wind.
`
DIS cannot be used if VA/MD and tempering detection are used.
`
Digital zoom cannot be used if DIS is used.
• Day/Night : You can switch the mode to adjust the black and white level as well
as the colors.
- Color : Always displays the video in colors.
- B/W : Always displays the video in black and white.
- Auto : Displays in color mode during normal daytime and switches to black and
white mode in a low contrast scene at night.
`
When the AGC mode of <Exposure> is set to <Off>, automatic day/night mode setting cannot
be selected.
• Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
• Duration : Specify the time interval of lighting at which the sequence operation is
triggered.
• Sharpness mode : Adjust the overall sharpness of the image.
If selecting <On>, you can adjust the sharpness of the image.
• Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
To Next Page
Loading...
