42_ maintain
Cleaning the Driving Wheel
You must turn off the Power Switch at the bottom of the main
unit before cleaning the robot.
If the vacuum cleaning robot suddenly starts to zigzag, there may be
■
foreign substances stuck on the driving wheel.
When cleaning the driving wheel, place a soft cloth on the fl oor and 1.
fl ip the main unit, placing it down carefully.
Check for foreign substances and remove them using a stick or a 2.
pair of blunt nippers if necessary.
DJ68-00633G(EN).indd 42DJ68-00633G(EN).indd 42 2012.2.15 6:46:6 PM2012.2.15 6:46:6 PM
To Next Page
Loading...
