Samsung SRD-1610 Quick Guide

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

English

8 CHANNEL/

16 CHANNEL DVR

Quick Guide

SRD-830/830D/830DC/

850/850D/850DC/870/870D/870DC/

1610/1610D/1610DC/1630/1630D/1630DC/

1650/1650D/1650DC/1670/1670D/1670DC

PT01-000089B-SRD-16XX, 8XX-QG_ENGLISH-.indd 1PT01-000089B-SRD-16XX, 8XX-QG_ENGLISH-.indd 1 2012-01-02 오후 8:30:592012-01-02 오후 8:30:59

Table of Contents

Other manuals for Samsung SRD-1610

User Manual132 pages

Specifications2 pages

Questions and Answers:

B
Bradley BarnesSep 4, 2025
What to do if the alarm button doesn't work on my Samsung DVR?
- J
  Jean JohnsonSep 4, 2025
  If the alarm on your Samsung DVR sounds and pressing the [ALARM] button on the front panel doesn't stop it, try the following steps using the [MENU] button: 1) To release the event monitoring mode: go to Monitoring Mode and set the duration of the event monitoring to Off. 2) To release the alarm sound: go to Event Record Mode - Alarm (Motion Detection/Video Loss) and deactivate the alarm sound. 3) To release the event: go to Event Record Mode - Alarm (Motion Detection/ Video Loss) and set the mode to Off.
B
Bryan LarsonAug 25, 2025
What to do if my Samsung SRD-1610 DVR displays 'NO HDD' icon?
- T
  timothyknightAug 25, 2025
  If your Samsung DVR displays the “NO HDD” icon and an error message, check the HDD for connection. If the problem persists in a normal condition, contact the nearest service center to have the HDD checked by the service personnel.
M
Michael TaylorAug 26, 2025
What to do if my Samsung SRD-1610 DVR does not recognize all installed disks?
- K
  Kerry OrtegaAug 26, 2025
  If your Samsung DVR does not recognize all the installed disks, it may simply need more time to recognize multiple external HDDs, so try again in a moment. If the problem persists, it may occur due to a mechanical error of the HDD installed, so try again with a different HDD.
C
Craig OconnorAug 27, 2025
Why does my Samsung DVR display a black screen on some channels?
- J
  jamesarroyoAug 27, 2025
  If some channels on your Samsung DVR display a black screen even if they receive video sources, first check if the camera connected to the system properly displays the image and if the camera is properly supplied with power. Sometimes, this problem may occur on a channel with weak video signal from a video distributor that is connected to multiple systems. In this case, input the video source of the camera directly into the DVR.
C
Christopher CookAug 27, 2025
What to do if my Samsung SRD-1610 system does not turn on?
- K
  Kyle PatelAug 27, 2025
  If your Samsung DVR system does not turn on, check if the power supply system is properly connected. Also, check the system for the input voltage from the power source. If the problem persists even after you have taken the above actions, check the power supplier and replace it with a new one if necessary.
J
John BairdAug 28, 2025
How to fix Samsung DVR not recognizing additional HDD?
- M
  Michael PerezAug 28, 2025
  See the compatibility list to check if the additional HDD is supported by the Samsung DVR. For the compatibility list, contact the retailer where you purchased the DVR.
N
nfigueroaSep 9, 2025
How to improve the recording quality on my Samsung DVR?
- B
  Bradley MartinezSep 9, 2025
  If the image quality of the recording data on your Samsung DVR isn't satisfactory, try increasing the resolution and quality level in Menu – Record – Quality / Resolution. Select a bigger size when specifying the recording size (4CIF>2CIF>CIF). Specify a bigger level for the recording quality. Keep in mind that increasing resolution and recording quality will increase the data size, filling the HDD faster and overwriting existing data sooner.
D
Desiree FuentesSep 10, 2025
What to do if the REC button doesn't work on my Samsung SRD-1610?
- B
  brianallenSep 10, 2025
  If you press the [REC] button on the front panel of your Samsung DVR and the REC indicator doesn't flash, and the player doesn't start recording, check if there is free space on the HDD. Also, verify that the record mode is set to ON in the record mode setting.
S
Shelby SimmonsSep 3, 2025
How to fix a Samsung SRD-1610 that does not turn on?
- G
  Gabriel PatelSep 3, 2025
  If your Samsung DVR does not turn on and the indicator on the front panel remains off, check whether the power supply system is properly connected. Also, verify the system's input voltage from the power source. If the problem continues, it might be necessary to inspect the power supplier and replace it if needed.
A
Ashley StevensSep 1, 2025
Why does my Samsung SRD-1610 DVR say 'Need to reset date/time'?
- B
  Benjamin BergerSep 1, 2025
  If your Samsung DVR displays a message saying “Need to reset date/time,” it means there's an issue with the internal clock's time setting or the clock itself. In this case, it is recommended to contact the retailer or a service center for further assistance.

Samsung SRD-1610 Specifications

General

Video Input Channels	16 channels
Compression	H.264
USB Ports	2 x USB 2.0
Operating System	Embedded Linux
Power Supply	DC 12V
Video Output	1 x VGA, 1 x HDMI
Recording Rate	120fps
Hard Drive Support	1 SATA HDD
Hard Drive Capacity	Up to 4TB
Audio Inputs	16
Audio Outputs	1
Network Interface	Ethernet
Playback Resolution	CIF

Related product manuals

Samsung SRD-1610D

Preview: Samsung SRD-1642

Samsung SRD-1642

Samsung SRD-1650

Samsung SRD-1630

Preview: Samsung SRD-1680D

Samsung SRD-1680D

Samsung SRD-1653D

Preview: Samsung SRD-1630D

Samsung SRD-1630D

Samsung SRD-1650D

Preview: Samsung SRD-1656D

Samsung SRD-1656D

Samsung SRD-1673D

Preview: Samsung SRD-1652D

Samsung SRD-1652D

Samsung SRD-1670DC