English _5
English
Setting the Backup
1. Press the [MENU] button on the remote control.
2. Use the left/right button (
_ +
) to select <Backup>.
Backup menu is selected.
3. Press the [ENTER] button.
A backup window appears.
You can directly access it from the “Live screen menu”.
4. Use direction buttons (
▲▼_ +
) to move to a desired item, and
set the value.
5. When the backup setup is done, press <OK>.
` If no available device is recognized for backup, <OK> button is not activated.
Backup
1. Select a data item and click <Play> in the Search menu.
The selected data is played and the play launcher appears on the
screen.
2. Click <
> to set the current time to the start time of backup;
you can specify a backup area using the mouse (yellow triangle).
3. Click <
> again to set the current time to the end time of the
backup and the “Backup Range” window appears.
4.
If you want to return to the Live screen in Play mode, click <
>
in the launcher menu or press the [
@
] button on the remote control.
Backup :
Used :
Free :
Check capacity
OK Cancel
Backup
Start 2013-01-01 00:01:06
End 2013-01-01 08:25:45
Overlap List0
Device Internal CD/...
Type SEC
Folder \20130101\
File Name 0001
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
ALL
Change
OK Cancel
Backup Range
Start 2013-01-01 00:01:06
End 2013-01-01 01:10:25
Device Internal CD/...
Type SEC
Folder \20130101\
File Name 0001
Backup :
Used :
Free :
Change
Check capacity
REC
SRD-1680D,880D-ENG-Quick Guide.indd 5 2013-11-28 16:04:19
To Next Page
Loading...
