6_ English
Network Connection
Port forwarding
1. Check the “Default Gateway” from the network properties of the
PC connected through the router.
2. From <Network> - <Connection Mode>, select <Connection>.
A window of connection mode setup appears.
3. Use direction buttons (
▲▼_ +
) to move to a desired item, and
set the value.
4. Enter the gateway address found in step 1 into the browser’s
address field to display the router settings.
5. Select the “Advanced” tab in the “Virtual Server” menu, enter the
IP address and port and click the <Apply> button.
M
` Above instructions are based on D-LINK DI-624 router. Port forwarding
setup may differ from the router’s manufacturer.
Connection Mode
Interface
Port
IP Type Static
Transfer Bandwidth 2Mbps
OK Cancel
IP Address 192.168.1.200
Gateway 192.168.1.1
Subnet Mask 255.255.255.0
DNS Manual 168.126.63.1
CH1 CH2
CH3 CH4
AUDIO OUT
VGA OUT
CONSOLE
HDMI
eSATA
NETWORK
SPOT 2
SPOT 1
1
NO
COM COM COM COM
NC NO NO NO
2 3 4
SERIAL
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
Broadband Modem
Remote PC
Internet
Broadband
Router or HUB
Local PC
SRD-1680D
SRD-1680D,880D-ENG-Quick Guide.indd 6 2013-11-28 16:04:20
To Next Page
Loading...
