63
Resolution
If the picture is not normal even when the resolution of the graphics card is one of the
following, you can optimise the picture quality by selecting the same resolution for the
product as the PC using this menu.
Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768
Auto Adjustment
MENU m → Picture → Auto Adjustment → ENTER E
―
Available in PC mode only.
Adjust frequency values/positions and fine tune the settings automatically.
PC Screen Adjustment
MENU m → Picture → PC Screen Adjustment → ENTER E
―
Available in PC mode only.
• Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the
frequency as best as possible (Coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned with the centre of screen.
• Position
To adjust the PC’s screen position if it is not centred or does not fit the product screen.
Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◀ or ▶ button to adjust
the Horizontal Position.
• Image Reset
Resets the image to the default settings.
Picture Off
MENU m → Picture → Picture Off → ENTER E
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
Reset Picture
MENU m → Picture → Reset Picture → ENTER E
Resets your current picture mode to its default settings.
―
If Picture Mode is set to Calibration, Reset Picture is disabled.
To Next Page
Loading...
