Samsung UH46F5

70
Eco Solution
MENU m → System → Eco Solution → ENTER E
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
• Off / Low / Medium / High
Screen Lamp Schedule
―
This option is enabled when Clock Set is configured.
Screen Lamp Schedule
Enable or disable the lamp schedule.
• Off / On
Schedule 1, Schedule 2
Time
The panel brightness will change to the brightness set in Lamp at a specified time.
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
• 0 ~ 100
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
• Off / 15 min. / 30 min. / 60 min.
―
Disabled when an attached PC is in power saving mode.
―
The product will automatically power off at a specified time. The time can be changed as
required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a
button on product front panel within select hours to prevent overheating.
• Off / 4 hours / 6 hours / 8 hours
Temperature Control
MENU m → System → Temperature Control → ENTER E
This function detects the internal temperature of the product. You can specify the temperature
range that is acceptable.
The default temperature is set to 77°C.
Recommended temperature for Temperature Control is 75°C~ 80°C (provided that the
surrounding temperature is 40°C).
―
The screen will become darker if the current temperature exceeds the specified
temperature limit. If the temperature continues to rise, the product will power off to
prevent overheating.