Samsung UH46F5

71
Change PIN
MENU m → System → Change PIN → ENTER E
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter a new PIN.. Reenter the same 4 digits in
Enter the PIN again..
When the Confirm screen disappears, press the OK button. The product has memorised your
new PIN.
―
Default password: 0 - 0 - 0 - 0
General
MENU m → System → General → ENTER E
Security
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Enter PIN function.
Safety Lock
It sets safe lock function.
• Off / On
All the menus and buttons of the product and remote control, except for the LOCK button on
the remote control, will be locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default
password: 0 - 0 - 0 - 0).
Power On Button
Turn on this feature to enable the remote control's Power button to turn on the device while
Safety Lock is enabled.
• Off / On
HDMI Hot Plug
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
• Off / On
Frame Alignment
MENU m → System → Frame Alignment → ENTER E
This menu is designed to correct for height differences when using Video Wall.
• Auto: Activates the menu on even rows, according to the H / V / Position settings under
Video Wall.
• Off: Turns off the Frame Alignment menu.
• On: Turns on the menu, irrespective of whether Video Wall is on.
Reset System
MENU m → System → Reset System → ENTER E
This option returns the current settings under system to the default factory settings.