Samsung UH46F5

16
Reverse Side
―
The colour and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
DVI/RGB/
MAGICINFO IN
USB
DP IN
HDMI 2
HDMI 1
RJ45
CONTROL
IN
DP OUT
(LOOPOUT)
RS232C
IN
RS232C
OUT
IR OUT
AUDIO IN
AUDIO OUT
Port Description
CONTROL IN
Supplies power to the external sensor board.
USB
Connect to a USB memory device. (applicable for updates and Clone Product only)
RJ45
Connects to MDC using a LAN cable.
DVI/RGB/MAGICINFO IN
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
RGB: Connects a D-SUB cable (via a DVI-RGB adapter) or a DVI-RGB cable to a PC.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
HDMI 1, HDMI 2
Connects to a source device using an HDMI cable.
DP IN
Connects to a PC using a DP cable.
RS232C IN
Connects to MDC using an RS232C adapter.
RS232C OUT
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
AUDIO IN
Receives sound from a PC via an audio cable.
AUDIO OUT
Connects to the audio of a source device.
DP OUT (LOOPOUT)
Connects to another product using a DP cable.
―
When connecting monitors through DP Loopout, using the DP cable that came
with the package is recommended.
―
This port uses an algorithm that is specific to UHD resolution input and
output. The port is not compatible with monitors that have FHD content-
specific DP Loopout ports. Connecting Loopout ports between monitors of
the same model is recommended.