Samsung UH46F5

38
Connection Using an HDMI Cable
HDMI 1, HDMI 2
Connection Using an DP Cable
DP IN
• Precautions for using DP
―
To increase the standby power capacity, the product stops DP communication when it is
turned off or in power-saving mode. If the product in dual monitor mode is turned off or
goes into power-saving mode, monitor setting changes may not be updated. As a result,
screen output may not be displayed properly. In the occurrence of this issue, set Max.
Power Saving to Off before using the product.
―
Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power-saving
mode. If this is the case, make sure to turn on the product first before turning on your PC.
―
The DisplayPort interface (DP IN) on the product and the provided DP cable are designed
based on the VESA standards. Using a DP cable that is not VESA compliant may cause the
product to function improperly. Samsung Electronics shall not be held responsible for any
issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.