How to get rid of excessive suds in my Samsung WA52M8650A?
To prevent excessive suds in your Samsung washer, use high-efficiency (HE) detergent. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
Why does my Samsung WA52M8650A keep stopping?
If your Samsung washer keeps stopping, ensure the power cord is plugged into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door and press Start/Pause. The machine clicks and does a quick drain before filling. There may be a pause or soak period in the cycle, so wait briefly. Make sure the inlet hose screens at the taps are not clogged. This problem may occur temporarily due to low voltages and will resolve when power recovers; periodically clean the screens.
Why is water not being supplied to my Samsung Washer?
If water isn't being supplied to your Samsung washer, press Start/Pause after selecting the water supply and ensure the water taps are open. Check if the filter net at the water supply hose connector is clogged; if so, clean it with a toothbrush. If the water supply is cut off, close the tap and power off the machine. Straighten the water supply hoses. Open and close the door, then press Start/Pause. Note that low water pressure can cause a delayed start. Adjust the water level using the level selector if needed.
How to reduce vibration and noise in my Samsung WA52M8650A Washer?
To reduce vibration and noise in your Samsung washer, ensure it's set on a level floor and isn't contacting any other object. Make sure the laundry load is balanced and spread evenly. Ensure the space around the washer is free of objects. Humming during operation is normal. Remove any objects like coins from the washing machine after washing.
What to do if water is not supplied to my Samsung WA52M8650A Washer?
If water is not being supplied to your Samsung Washer, first, ensure you press the START/PAUSE button after selecting your cycle and options, and that the water taps are fully open. Straighten any kinks in the water supply hoses. Open and close the door, then press START/PAUSE. If the water pressure is low, the start of the wash may be delayed. Adjust the water level using the level selector if it's lower than expected. If the water supply is cut off, close the tap and power off.
Why does water drain out immediately from my Samsung WA52M8650A?
If water drains out immediately from your Samsung washer: * Make sure the drain hose is not clogged and is hung over the drain hose hook. Fill the spin basket halfway with water, and try spinning again. * Lift the end of the drain hose to prevent water from draining. Fill the spin basket halfway with water, and then run the Spin cycle after releasing the drain hose. * Ensure the drain hose is installed correctly.
Why does my Samsung Washer leak water?
Your Samsung Washer might be leaking water due to several reasons: * Ensure all hose connections are tight. * Check the water supply hoses' rubber washers are correctly positioned and screwed tightly. * Verify the drain hose is correctly inserted and secured to the drain system. * Avoid overloading the washer. * Use high-efficiency (HE) detergent to prevent oversudsing. * Make sure the water supply hose isn't kinked. * If the water supply pressure is too strong, close the water tap a little. * Check if water is leaking from the water tap; if so, repair it.
Why is detergent remaining in the automatic dispenser of my Samsung Washer after a cycle?
If detergent remains in the automatic dispenser of your Samsung washer after a cycle: * Ensure the washing machine is running with sufficient water pressure. * Make sure the detergent drawer is properly inserted. * Remove and clean the detergent drawer, and then try again.
Why are my clothes still wet after a Samsung WA52M8650A Washer cycle?
If your clothes are still wet after a Samsung washer cycle: * Use the High or Extra High spin speed cycle (if available on your model). * Use high-efficiency (HE) detergent to reduce oversudsing. * Small loads (one or two items) may become unbalanced and not spin completely.
Why does my Samsung Washer stop mid-cycle?
If your Samsung washer stops during a cycle, consider these possibilities: * Ensure the power cord is plugged into a live electrical outlet. * Check the fuse or reset the circuit breaker. * Close the door and press START/PAUSE to start the washing machine. It won't spin unless the door is closed for safety. * The machine makes clicking noises to check the door lock, followed by a quick drain before filling. * There may be a pause or soak period in the cycle; wait briefly. * Ensure the inlet hose filters at the taps are not clogged; clean them periodically. * Low voltage in your home's electrical system can cause temporary stops; it will resolve when the voltage returns to normal.
General| Type | Top Load Washer |
|---|---|
| Capacity | 5.2 cu. ft. |
| Energy Star Certified | Yes |
| Wash Cycles | 12 |
| Steam Wash | Yes |
| Vibration Reduction Technology (VRT) | Yes |
| Smart Features | SmartThings App |
| Color | White |
Essential guidelines to prevent fire, electric shock, or injury during operation.
Vital safety warnings for operating and installing the washer to avoid accidents.
Official statements on FCC compliance and radiation exposure limits.
Guidelines for choosing a suitable location and preparing for washer installation.
Detailed instructions for connecting, leveling, powering, and testing the washer.
Procedures for correctly connecting water supply and drain hoses.
Steps to ensure proper leveling and electrical connection for safe operation.
Guidelines for loading clothes and initiating the washing process.
Comprehensive guide to selecting cycles, temperatures, spin speeds, and options.
Explanation of the control panel buttons, indicators, and display functions.
Instructions for using HE detergents and loading fabric softener and bleach into dispensers.
Methods for cleaning the washer's exterior, interior, and dispensers.
Guidance on cleaning the mesh filter and performing the Self Clean cycle for maintenance.
A guide to identifying and resolving typical problems using checkpoints and information codes.
Details on washer dimensions, performance, and a chart of wash cycles and settings.
Terms and conditions of the manufacturer's warranty for U.S.A. and Canada.
To Next Page