16 _Disassembly and Reassembly
No. Part name Description Figure
02 ASSY PANEL
CONTROL
1. Remove the 2 screws
xed the front of the
operating panel.
2. Remove the 2 screws at
the top of the assy panel
control.
3. Hold the assy panel
control while pulling it
outwards and release
the hook to remove it.
4. Disconnect the terminals
connected to the pcb by
hands.separate the assy
panel control.
5. Press the clasp ① and
clasp ② at the same
time, separate clasp ③
and ④ as the same way,
Lift pcb up, then take it
out from left.
1
2
3
5
4
6
To Next Page
Loading...
