Disassembly and Reassembly_15
3-2.STANDARD DISASSEMBLY DRAWINGS
This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
ct.
No. Part name Description Figure
01 ASSY TOP
COVER
1. Remove the 2 screws
holding the back of top-
cover on the unit.
2. Remove the top-cover
by pulling it back.
3. Then, the water pressure
sensor, noise lter and
water valve can be
replaced.
NOISE FILTER VALVE WATER
WATER (PRESSURE) SENSOR
To Next Page
Loading...
