Disassembly and Reassembly_21
No. Part name Description Figure
08 BUBBLE
PUMP AND
DRAIN PUMP
1. Insert the (-) screwdrver
into the upper part of the
lter cover and push it
downwards to release the
catch.
Then seperate frame front.
2. Remove the remaining
water through the drain-
age hose.
Place a bowl under the
drainage hose, or the
remaining water may ow
out.
3. Remove the screw hold-
ing the drain pump.
4. Remove the clips holding
the drain pump hose.
5. Disconnect the terminal
of wire.
To Next Page
Loading...
